Love the way the Special Edition Brake and Clutch Reservoirs look, and want to add them to my non-Special Edition. Can these be used with the Nissin Master cylinders?
Created on: 01/04/18 01:24 PM
Replies: 62
Eray
Joined: 10/13/14
Posts: 233
Eray
Joined: 10/13/14
Posts: 233
cruderudy
Location: AMR
Joined: 08/15/12
Posts: 1963
Rook
Joined: 03/28/09
Posts: 20596
cruderudy
Location: AMR
Joined: 08/15/12
Posts: 1963
RE: Brake & Clutch Reserviors
01/23/18 1:07 PM
Eray
Did you have to order the reservoir/cap/diagram other parts separately?? or does someone sell a complete assembly? I checked Partzilla and Bikebandit ant it seems like I would have to order separate parts?
Eray
Joined: 10/13/14
Posts: 233
RE: Brake & Clutch Reserviors
01/23/18 2:17 PM
Did you have to order the reservoir/cap/diagram other parts separately?? or does someone sell a complete assembly? I checked Partzilla and Bikebandit ant it seems like I would have to order separate parts?
Had to order separate parts, Reservoirs (Clutch and brake), brackets (brake side only) for reservoir and throttle cables, and the screw, rubber grommet (damper), collar, and nut.
* Last updated by: Eray on 1/23/2018 @ 2:21 PM *
piken
Location: Phoenix, AZ
Joined: 08/27/15
Posts: 665
Eray
Joined: 10/13/14
Posts: 233
RE: Brake & Clutch Reserviors
01/23/18 2:25 PM
43078-0577 - RESERVOIR
$17.57
43078-0580 - RESERVOIR
$16.13
11056-7711 - BRACKET,RESERVOIR
$12.12
11056-7789 - BRACKET,THROTTLE CABL
$7.70
92075-1028 - DAMPER RUBBER
$2.18
92152-2110 - COLLAR,6X16X10.6
$12.55
92154-1644 - BOLT,SOCKET,6X20
$1.03
92210-0322 - NUT,CAP,6MM
$0.51
$69.79 if I did the math correct. It's shipping that gets you.
* Last updated by: Eray on 1/23/2018 @ 2:28 PM *
cruderudy
Location: AMR
Joined: 08/15/12
Posts: 1963
metalmechanic
Location: WYOMING
Joined: 10/15/13
Posts: 61
JonnieFingaz
Joined: 01/14/19
Posts: 1
RE: Brake & Clutch Reserviors
03/07/19 8:34 AM
New to the forum. I just bought a 2008 ZX-14 Special Edition with 31,000 miles on her. I've changed all fluids. Put on the VooDoo dual slip on exhaust. Getting ready to do a Valve cover gasket replacement. Replace all worn and rusty parts. I have recently replaced the Brake & Clutch Reservoirs. The old ones were dry rot. So I decided to go with the 2016 ZX-14 Special Edition Brake & Clutch Reservoirs instead. The new cap and bracket for the clutch reservoir didn't come in yet. But I could wait to put them on. My next move is refreshing the paint on wheels and frame. My plan is to have her looking and running better then new by the end of the year.
cruderudy
Location: AMR
Joined: 08/15/12
Posts: 1963
Rook
Joined: 03/28/09
Posts: 20596
moppedmanniemie
Location: Stuttgart
Joined: 11/06/14
Posts: 75
beck6
Joined: 05/05/19
Posts: 6
RE: Brake & Clutch Reserviors
05/14/19 3:12 AM
I ordered a clutch here, I think it is still very good. https://www.allicdata.com/products.html
piken
Location: Phoenix, AZ
Joined: 08/27/15
Posts: 665
RE: Brake & Clutch Reserviors
09/03/19 10:34 PM
Was thinking a while back of doing the smoked tank swap from the SE but
came across these, just received them today.
Exact same Nissin Parts, Smoked, Direct replacement, got them from Webike Japan. Webike Japan Great Site.
$40 for both and used the cheapest slow boat from Japan shipping $8 Total = $48
Took around 3 weeks to get to me, no tracking info etc.
moppedmanniemie
Location: Stuttgart
Joined: 11/06/14
Posts: 75
Eray
Joined: 10/13/14
Posts: 233
ahhlou
Location:
Joined: 05/21/17
Posts: 88
Grn14
Location: Montana
Joined: 02/25/09
Posts: 15511
RE: Brake & Clutch Reserviors
09/05/19 2:05 PM
I should be getting my set today.Less than 50 bucks on partzilla.All the internals are the same,so no need to go with the 'new' inner parts.
You shouldn't need to bleed the brakes again.Just suck the reservoir fluid out,and remove the reservoir(with rags of course)...install new one and fill.
* Last updated by: Grn14 on 9/5/2019 @ 2:07 PM *
piken
Location: Phoenix, AZ
Joined: 08/27/15
Posts: 665
RE: Brake & Clutch Reserviors
09/05/19 3:33 PM
All the internals are the same,so no need to go with the 'new' inner parts.
Not quite sure what that means?
If you ordered the smoked ones from the SE model then I believe you
are going to receive the Brembo tanks. Unless they have some Smoked Nissins listed
somewhere.
If you currently have the white Nissin's on the bike, they mount differently
and you'll need a few more parts. Eray listed the additional parts above.
The Brembo and the Nissin are not a direct swap, at least for the Brake master.
* Last updated by: piken on 9/5/2019 @ 3:34 PM *
ahhlou
Location:
Joined: 05/21/17
Posts: 88
RE: Brake & Clutch Reserviors
09/06/19 12:22 PM
Grn14: You shouldn't need to bleed the brakes again.Just suck the reservoir fluid out,and remove the reservoir(with rags of course)...install new one and fill.
thanks for the tip Grn14.
Grn14
Location: Montana
Joined: 02/25/09
Posts: 15511
RE: Brake & Clutch Reserviors
09/06/19 6:17 PM
Okay..well,I got mine today...they aren't smoked(like youse guys).They're whitish.Anyone have the part numbers...gonna have ta send em back and get the right ones.Bummer.Partzilla.What model year of bike is this for anyway...thanks all...when the part descriptionsays 'clear'...apparently that means 'white'!Here we go again!!lol.
* Last updated by: Grn14 on 9/6/2019 @ 6:29 PM *
BigRed1
Location: PNW
Joined: 02/14/16
Posts: 105
New Post
Please login to post a response.